Your home talks a lot about your decoration taste. If you think that interior design will cost you a fortune, you are misguided. Small handyman works can do wonders for your home. In case you are looking for a rich texture, along with a warm accent, then nothing goes better than a wood accent wall.
If you have found a wide space to show some creativity, you should stick to the wood accent wall for an elegant signature. However, you might find it difficult to choose the right type of wood for the wall. If you are confused between reclaimed wood and store-bought wood and how to accomplish the entire project, then this guide will help you out.Otherwise you can also visit handyman in dubai.
How to Install a Wood Accent Wall at your Home?
Installation becomes easier when you are equipped with the right set of tools. Irrespective of the fact – whether you are an amateur in handyman work or have enough experience, the basic equipment for accent wood wall installation remains almost the same.
Here is the list that you will require for wood accent wall installation.
- Wood planks
- Paintbrush
- Pencil
- Carpenter’s level
- Stain
- Tape measure
- Rags
- Nail gun
- Wood adhesive
- Stud finder
- Caulk gun
- Hammer
- Caulk gun
- Saw
Now, you have to proceed with the following steps to accomplish a wood accent wall handyman work.
Select the Wall
You should not randomly choose a wall for creating a rich accent. Select the space wisely for setting up the accent wall. This can be the wall where you have placed your mantel or the television. The wall behind the headboard is also a great option.
Take the Measurement
You need to measure the wall you want to convert into an accent wall. Otherwise, you won’t have the right dimensions of wood to fit your wall properly. Additionally, you’ll have the right amount of wood to install on your wall. We are sure that you won’t like it if you run out of wood when you are just a few steps away from completing the handyman work.
So, take a measuring tape to figure out the height and width of your wall. Once you have got the right width and height measurements, you have to multiply them to get the area. If you have taken the measurement in “ft”, then you have the area measured in square footage. However, you should purchase up to 15% more than you have calculated for your wall.
On a contrary note, you might generate more waste when going for reclaimed wood. And, you can’t use them in the future.
Make a Choice for your Wood
The next important step to the handyman work is to select the type of wood. There are different types of wood on which you can rely for the installation of the wood accent wall. For example, you can go for wood planks. The wood planks can be painted and ready to be installed. However, you can stain them if you purchase them distressed.
In addition to this, most prefer to purchase tongue and groove boards that one can fit properly to the wall corners. Apart from easy installation, they can be easily sawed for a perfect fit. Or, you can go for reclaimed barn wood if you want to source your wood from a nearby historical building or salvaged barn. The hardware stores sell reclaimed barn wood, and some of them even come with pre-adhesive backs.
Get Ready with Necessary Tools
You might have noticed all the equipment you are going to need to set up a wood accent wall. This is moderate handyman work and it requires a pretty long list of tools. Keep a pencil handy along with the above-mentioned tools. In addition, you might require a miter saw to cut off the edges of the wood plank. This will give you a smooth look and a perfect fit.
Make the Precise Markings
Make sure that you keep the hammer, nails, and associated tools ready for the project. Keep track of all the studs for marking the planks and walls. Thus, you’ll know where to nail the wood planks to the wall. However, hammer and nails are not the only way to install the wood accent wall.
There are other alternatives to nails and studs. One can completely rely on wood that comes with adhesive on their backs. If you’re using the adhesive ones, make sure that you mark your wall. Thus, you’ll have a clear concept regarding where you can adhere the planks to the wall.
Cut the Boards or Wood
Once you are done with measuring the wall and purchasing the wood, you will have a clear answer about how many boards of wood you would require. And, your wall will have the perfect fit. Make sure that you don’t dodge the electrical outlets, switches, and thermostats if there is any on the wall. Don’t forget to cut the board according to the measurements of the switches, outlets, or anything on the wall. You should do this before you start the actual installation.
Install the Wood Boards on the Wall
Before you start installing the wood boards on the wall you need to remove the baseboards. Initiate removing all the baseboards from the bottom of the wall. Simultaneously, you have to fit the wood boards into the wall. Ensure that you are adhering to the wood boards in a straight line. And, for precise alignment, you should use a level on each row of the installed wood boards.
In case you are using the adhesive boards, hold them tightly, in their places, to the wall. Otherwise, use a nail gun to keep the board held in its place, and then nail the board. The nail should stick to a stud already placed on the wall during the marking procedure. Repeat the step unless and until you have adhered all the wood boards to the wood accent wall.
It’s Time to Stain
Hopefully, you have installed all the wooden planks securely on the wall. The process has provided a base to your handyman work, but it has not reached its final result. Now, you need to add your touch to the wood accent wall. Yes, we are talking about staining or painting the wall according to your taste and aesthetics.
If your wood comes prepared or stained, then you need not paint it anymore. Or else, you can come up with your favourite stain for the wood handyman work. Don’t forget to use an old rag below while painting your accent wall, it will reduce the mess.
Any Other Options to Create a Signature wall?
Installing a wood accent wall is a moderate handyman work project. However, you need not worry and opt for such a DIY handyman work project. You can hire handyman professionals to do it for you. Or else, you can go for simpler wall decorations, such as installing wallpapers, installing floating shelves, or a ready-to-stick wall project. So, decide the perfect wall for your creativity and dive into it with the right handyman tool-set.
