There are many aspects to consider when selecting a cricket bat. The weight, seam marks, and thread winding of a cricket bat are just a few of the qualities that can be examined. In addition to these factors, the cricket bat’s durability should be assessed in order to ensure that it will last you for many years. After reading this article, you should be well equipped to select the perfect cricket bat. If you’re unsure about the process of selecting the perfect cricket bat, take a look at our guide.
Quality of a cricket bat
The quality of a mrf cricket bat depends on several factors. First of all, the bat must be balanced. The clefts are sized appropriately and are carefully selected. There are many variables that affect the decision makers in selecting the clefts. Once they have met the required moisture level, the clefts are taken out of the drying room. Then they are cut to the desired shape. The basic shaping process is performed to make estimations. Next comes grading. The grading process helps to ensure the balance of the bat.
Weight of a cricket bat
The weight of a cricket bat is an important factor when choosing a new bat. While the overall weight of a cricket bat may not seem like much, even 3.4 ounces can make a huge difference in overall feel. A cricket bat that is too heavy can make it difficult to swing, and a bat that is too light can make you feel unbalanced. Many cricket players use two grips to balance their bats, which will also affect the weight.
Seam marks
Cricket bats with seam marks must be knocked in again before being used for batting. After the game, a cricketer can knock them in again with increased force and aggressiveness. If the seams are clean, the cricketer can put them into his bag and prepare for the next game. The bat is one of the most expensive pieces of equipment a player owns, and so it must be treated with care.
Thread winding on a cricket bat
First, we need to secure the grip. To do this, we will use electrical tape. First, we apply it to the outside grip, above the shoulder. After that, we should wrap it around the end of the bat. Then, we will wrap tape around the shoulder splice and around the grip itself. This will secure the grip and prevent it from sliding up. After this, we can begin thread winding the cricket bat.
Size of a cricket bat
There is no single size of cricket bat for women, but the size of an adult cricket bat is equivalent to that of a junior. Adult cricket bats are often referred to as Small Men’s or Harrow. A junior cricket bat, however, is referred to as an Academy, which is a general term for all junior cricket bats. Look for a size label on the handle of a cricket bat when buying it online or in a sports shop.
Oiling a cricket bat
There are several benefits of oiling a cricket bat. It helps repel water. Linseed oil is one of the most popular oils. To apply it, wipe linseed oil on the bat using a cloth. Make sure to oil the entire surface of the bat, not just the splices. Avoid oiling the glue in these areas, since you don’t want to compromise it. After oiling the bat, start the knocking-in process.
Checking for seam marks
Before using a cricket bat, make sure to check it for any seam marks. These can be a sign that the willow is too dry, or that the bat was not properly prepared. If there are seam marks, you will have to knock the bat again. Then, return to stage one and knock it harder again, decreasing the force as you approach the edges and toe of the bat. Otherwise, you can play with the bat.
