If correctly done, they both have their places and are highly effective in removing different finishes. If they are not used correctly, they can cause severe damage, not just to the logs but also to trims made of metal glass, vinyl, and metal, as well as cause destruction to the interior of your home’s records from excessive dust or water Vessel Blasting and Painting. It is important to note that only the most skilled professional should be permitted to employ either technique in your house. Many log homes of today contain oil-based stains and sealers. Chemical stripping is the most popular method of getting rid of the coats.
However, there are certain exceptions. Some of the more challenging “film forming” stains, including the linseed oil-based stains, as well as paints and latex stains, are unable to respond to chemical stripping and may need to be removed using cob blasting. They are typically rare but as latex stains increase in popularity, so will cob blasting. When it comes to chemical stripping, it is about how it works rather than the pressure! The chemical is the instrument that does the job rather than the pressure washer. Our pressure washer is more for the amount of water (six Gallons per Minute) instead of the pressure. It starts by mixing a thin solution of stripper.
We then apply it to the logs using a spray. Then, it is allowed to “dwell” for a predetermined time. Then we conduct an initial test to see how the sealer reacts in response to a stripper. If required, we alter the solution to the optimal strength so that we can remove the sealer in a timely way, but to reduce “furring” to the wood. The sealer you choose will cause certain “furring” of the wood to be expected Vessel Steel Repairs. It can be easily removed with pads for defeat at the end of the process. As I am stripping the chemical, my wife is in the home’s interior made of logs, checking for leaks. And, yes, there are going to leak. We have yet to restore a log home that didn’t reveal in any way. Even the most expensive log houses leak. …. It’s still an old log! Leaks are sometimes good. Water is an excellent indicator of areas of the house that have leaks. When leaks are discovered, and we identify the extent to which the leak occurred, we can return to fix the problem by caulking, weather stripping, or any other means necessary to resolve the leak, making the home weatherproof.
After stripping has been completed after which, it has to be neutralized and given enough time to dry before sealing. It typically takes two to four days. However, the only way of knowing whether it is true is to check with an instrument for measuring moisture. A moisture content of 18% or lower is required before any finish can be applied. This technique of removing older finishes is safe and reliable if done correctly. But for the uninitiated, too much chemical mix cannot just “fur” the wood. However, it may cause the wood to soften until it needs to be replaced.
In the event of too much pressure, it is not enough to “fur” the wood but also slash the timber and damage other areas of the house, like windows and siding Vessel Ship Supplies. You must ensure that you have a person who is knowledgeable about what they are doing, and chemical stripping can be an effective method of removing the old finish. When you use Cob Blasting, the same principle applies. It’s just the way it is done. The name alone scares people as they aren’t aware of this procedure.
