22 C
New York
Wednesday, June 12, 2024

Important Do’s and Don’ts After Getting Your Asphalt Driveway Laid Out

Getting your first asphalt driveway is always exciting. The dark color of that new asphalt mix cleans the look of your property’s exterior quite nicely. Also, it provides a good place for your vehicles to rest when outdoors. Many people only get an asphalt driveway few times in their whole life. So, it is important to get it done right and looking good for long.

When you get your project completed by a quality asphalt paving contractor, the surface should last decades. However, some maintenance will be required every so often. Also, right after getting that driveway laid out, there are some precautions you need to undertake. There are also some things that you can do right for that driveway to start its journey with you nicely.

Do’s After Getting Your Asphalt Driveway Finished

Wait at least 24 hours before driving on it

Definitely do wait for at least 24 hours before driving vehicles on your driveway. Go 48 hours where possible. The asphalt driveway with all its layers including the adhesive layer need this much time to set in properly. In hotter climates, you might need to wait for even longer. For best application, make sure to not let any heavy objects on it for at least 2 days after getting it laid out first. This is the cure time that hot mix needs to harden properly.

Ensure rolling vehicle wheels before turning the steering for first few months

Even though that asphalt, the stones and everything hardens within 24-48 hours, it will still be softer for the first few months. There are certain practices that might damage the top layer taking bits off it. If you race your vehicles too much starting up, this might happen. So, make sure that wheels are rolling before you turn that steering wheel too. Stationary lateral movement of the tyres can scrap off the top layer that is also called the sealcoat. This will ensure your driveway has a nice finish for longer.

Use a sifted topsoil and seed

In case your new asphalt driveway doesn’t make use of sod, make sure to go with sifted topsoil and seed. Use it alongside the landscaping part. Some soils can react with that asphalt and may cause minor flaking around the bevel edge. There is not much that can be done to stop this reaction. Your best chance is for a sifted topsoil and seed to prevent this.

Do maintain your driveway and get maintenance work every few years

Even though, asphalt driveways are pretty firm and durable, they are still outdoors always. Exposure to elements can damage their surfaces and even bottom layers. If your area gets a lot of rain, snow or gets very hot, chances are there can be certain problems developing in the long run. So, make sure to get proper maintenance when required. A sealcoat might be required every 4-5 years or quicker in hotter areas. Fresh sealcoat makes your driveway look new again and also melts snow quicker. Other maintenance requirements might include pothole fillings and crack fillings every so often.

Don’ts to Follow After Your Driveway Project

Don’t let water or snow settle on the driveway for too long

Monsoon can drop high amounts of water on your driveway. If your area gets a lot of rain, make sure to have it sloped more. Also, a proper mix will have to be prepared by your driveway paving contractor Washington . Also, snow residing on it will cause water to leak in and take out the adhesive layer. Remove standing water as often as possible and also snow. This is why a fresh sealcoat will also be more beneficial.

Don’t Park heavy vehicles in the same exact spot every time

Parking your cars or vehicles on the driveway is normal practice. You will do it every day. However, make it a priority to not park on the same exact spot every time. When you do this, your driveway might get pressed in those spots where the tyres rest. As hard as an asphalt driveway may be, it will get pressed and develop indented spots if you park in the same spot. Just Park at different spots from time to time.

Don’t let mulch and wood stay on the driveway for long

Mulch and wood deliveries are often left on the driveway. There is no such harm for this too. However, when mulch and woods sit one the asphalt driveway for longer periods of time, they will leave hard to remove stains. Also, contaminated water can get inside the asphalt layers. This can make the adhesive lose its effectiveness and make debris come off.

Don’t sealcoat for at least a year after a fresh driveway

Sealcoating is good. It renews the look and feel of your asphalt driveway. However, do not sealcoat your driveway for at least one year after first getting it laid. Have it sealed every 2-4 years if you have any cracks showing up.

Bottom Line

A nicely laid driveway can boost the outlook of your property very efficiently. Make sure to follow these tips and make your driveway last longer. A good asphalt paved driveway should last up to three decades. In some parts of the world, it may last less than that.

However, make sure to maintain it well over time to prolong its life. Some other tips include not letting any organics grow near the edges or from under the driveway. These tips make your driveway look nicer and last way longer when completed.

Uneeb Khan
Uneeb Khan
Uneeb Khan CEO at blogili.com. Have 4 years of experience in the websites field. Uneeb Khan is the premier and most trustworthy informer for technology, telecom, business, auto news, games review in World.

Related Articles

Stay Connected

0FansLike
3,912FollowersFollow
0SubscribersSubscribe

Latest Articles