Amped wireless extender is one of the most powerful and outstanding devices to consider in today’s modern era of technology. The device has grabbed many eye-balls! But, being a WiFi device, your Amped wireless extender may also stuck with major issues. And, if these issues aren’t fixed on time, will force you reset your Amped wireless extender.
In this post, first we are going to provide you the topmost reasons what might have led you experience the issue and after that, we will provide you complete instructions on how to reset your Amped wireless extender in a hassle-free way.
Reasons that Have Force You Reset Extender
Here are the common yet major reasons that are forcing you apply the reset process on your Amped wireless range extender:
- Amped extender connected but getting no internet
- Continuously seeing red LED on the extender
- Can’t perform firmware update or the process has bricked your extender
- Getting firmware update failed issue
- Can’t access Amped wireless setup page for extender configuration
- Amped wireless extender login details are not working
- Unable to access the default web address of Amped wirless extender i.e. http://setup.ampedwireless.com
- Failed to configure Amped wireless extender
- Extender is not connecting to the router
Well, there can be more reasons that have led you perform Amped wireless extender reset process. Regardless of what extender-related issues you are getting, we have got you covered always.
Look, before resetting your Amped wireless extender, we suggest you power cycle it first. Resetting would be the last step so why not start with the first one.
Yes, many big issues related to Amped wireless extender are fixed by simply power cycling it, be it, Amped wireless extender login or amped wireless setup issues.
So, without further discussion, let us provide you the instructions to power cycle your Amped wireless extender. Here we go:
Step 1: Just turn off your Amped wireless extender. And, yes, you have to disconnect it from your connected devices.
Step 2: After unplugging the extender, wait for some time, and then, plug it back in again.
Step 3: Reconnect the extender to the disconnected devices.
Now, what issue you are facing with your Amped wireless extender? See, if it got fixed by applying the power cycling process. If yes, then there is no need to reset your Amped wireless range extender. Just in case, the issue hasn’t resolved yet, then you can now take the plunge to reset your wireless range extender.
Reset Amped Wireless Extender
In this process, there is no need to unplug your Amped wireless range extender. But, the disconnecting process is required during resetting as well.
Now, what you have to do, locate the reset hole on your Amped wireless extender. Did you find it? If yes, then press it using a small, thin, and pointed thing.
Upon holding the reset hole, you don’t have to release it right away. Have patience! Hold it for some time, and then, you are free to release it.
After resetting your range extender, you have to perform the Amped wireless setup process from the scratch.
And, that’s it! You have successfully fixed the issue with your Amped wireless extender by resetting it like a pro.
In a Nutshell
Getting issues with Amped wireless extender is quite common. But, we suggest you take the resetting process as the last resort. As we have already said, start fixing the issues related to your extender by power cycling it first. And, if power cycling doesn’t help, you can opt for resetting process by following the guidelines provided above.
Wishing you a lag-free, issue-free, and stress-free experience with Amped wireless extender! Good luck!