23.6 C
New York
Wednesday, June 12, 2024

Quick Guide to Fix Netgear Extender Not Working Issue

Netgear extender not working is one of the most common issues faced by every fourth Netgear extender user across the globe. Even after setting up Netgear extender via www.mywifiext.net properly, users encounter with this type of annoying issue. But, you don’t have to worry at all! With a few Netgear extender troubleshooting hacks provided in this post, you will surely able to resolve the issue at hand. Thus, without much delay, let’s get started!

Wait! Prior to shedding lights on the hacks to help you fix “Netgear extender not working” issue, we want to make you acquainted with the common reason that have caused it, shall we? Continue reading!

Why Netgear Extender Not Working?

Mentioned below are the most common reasons that have leaded you to experience “Netgear extender not working” issue:

  • Inadequate power supply
  • Loose or faulty Ethernet connection
  • Technical glitches
  • Outdated extender firmware
  • Partial Netgear extender setup
  • WiFi interference

That’s all about the reasons! Keep scrolling down to know the hacks to troubleshoot “Netgear extender not working” issue.

Fix: Netgear Extender Not Working

Check the Power Supply

Inadequate power supply can also be the reason behind “Netgear extender not working” issue. To troubleshoot it, make sure to provide a fluctuation-free power supply to your Netgear WiFi extender. Also, have a look at its wall socket. Make sure that it isn’t loose or damaged.

Have a Look at the Connection

If you router and Netgear extender aren’t properly connected, then you will surely get “Netgear extender not working” issue. To get it fixed, ensure to connect the devices in a proper way. Also, have a look at the Ethernet cable. It must not be worn out or damaged.

By any chance, you don’t have an Ethernet cable you can connect the devices in a wireless manner. Just search for Netgear_ext (SSID) and get connected to it.

Check for WiFi Interference

For the well working of the Netgear extender, we suggest you place it away from baby monitors, Bluetooth speakers, cordless phones, treadmills, smart HDTV, and Alexa devices. Why? Because they emit radio electromagnetic waves! So? They have the power to mess with the signals of your extender, resulting in “Netgear extender not working” issue.

If it is a bit impossible to keep your Netgear extender away from the interference-creating WiFi devices, then you can turn them off when not in use. “Will it work”? Of course it will!

Update Netgear Extender Firmware

After following the aforementioned Netgear extender troubleshooting hacks, are you still not able to resolve “Netgear extender not working” issue? No? Please don’t sweat over it! Updating the extender’s firmware can help. To execute the process, visit the Netgear extender’s official site via mywifiext local. Once you are in there, provide your Netgear extender’s model number and follow the instructions on-screen.

Note: In case you are using a Windows computer or laptop to update Netgear extender firmware, then use mywifiext.net web address instead of mywifiext local. Why? Because mywifiext local is meant for Apple, iOS, MacBook, iPhone, or iPad only.

Reset the Extender

Technical glitches and partial Netgear extender setup process also lead you to “Netgear extender not working” issue. The best way to get it fixed is to reset your Netgear WiFi extender back to factory default values.

To execute the Netgear extender reset process, follow the guidelines underneath:

  • First things first, get disconnected from Netgear_ext (SSID)
  • Then, press the Netgear extender reset hole
  • Hold the extender’s reset hole
  • Leave it upon holding it for some time
  • Reconnect to Netgear_ext (SSID)
  • Take the plunge to reconfigure the extender

Restart the Extender

If you find resetting Netgear extender a daunting task, then you can fix technical glitches with it by simply power cycling it.

Note: The power cycling process is not meant for improper Netgear extender setup or Netgear extender firmware update failed issue. But, yes! The power cycling process can be helpful in fixing “Netgear extender not working” issue.

  • Disconnect the Ethernet cable connecting router and the extender. Have you connected them using a wireless source? Then, get disconnected from the extender’s SSID
  • Are you done? Yes Now, turn off your Netgear extender
  • Wait for some time
  • Turn the extender back on
  • Allow the power LED on the extender to become green and stable
  • Once the Netgear extender’s power LED has become stable green, connect the router with it

Fab! After power cycling, the “Netgear extender not working” issue will surely get fixed. Don’t forget to share your feedback regarding this post.

Uneeb Khan
Uneeb Khan
Uneeb Khan CEO at blogili.com. Have 4 years of experience in the websites field. Uneeb Khan is the premier and most trustworthy informer for technology, telecom, business, auto news, games review in World.

Related Articles

Stay Connected


Latest Articles