Linksys is one of the most famous brands known for experimenting with and innovating networking devices. Whether it is router or extender, Linksys doesn’t seem to lag in fulfilling the internet needs of users. Then comes the Linksys Velop mesh WiFi system which uses cutting-edge technology for signal transmission. It consists of a mesh WiFi extender and nodes. The extender connects to the modem and nodes to the extender. After that, access the Linksys Velop login page and no one can stop you from accessing a superb-internet connection in the blind zones of the house.
But, there comes a time when the Linksys Velop refuses to connect to the nearest node. Do you know the reason behind this problem? No? Read this article and learn troubleshooting tips too. Scroll down!
Why is Linksys Velop Not Connecting to Nearest Node?
The most common reasons that might be creating hurdles in the path of your Linksys Velop extender to share a connection with the nearest node are as follows:
- Your Velop is getting a fluctuating electricity supply.
- The distance separating your Velop extender and node is too much.
- You haven’t used a healthy Ethernet wire to connect your Velop extender to the modem.
- The placement of your closest node is incorrect.
- The firmware of your Linksys Velop extender might have become outdated.
- You might have installed your Velop device in an incorrect manner.
Considering that your brain has now received enough information regarding the reasons causing the Velop extender and node connectivity issue, it is time that you troubleshoot it before it gets too late.
[Fixed] Linksys Velop Not Connecting to Nearest Node
Try the troubleshooting techniques mentioned below in order to get rid of the connectivity issue between your Linksys Velop extender and router.
- Cast a look at the wall socket that is supplying electricity to your Linksys Velop extender. Are you sure that is capable enough to do its job? If not, then use another power socket.
- Get closer to your Velop node and then the extender. Did you notice something? Too much distance, right? Thus, reduce the distance separating your devices and see if the issue resolves.
- Now, move to the host router that is connected to your extender. Is the Ethernet cable holding your devices together alright? No? Proceed with another Ethernet cable then.
- Relocate your Velop node and ensure that it is away from EM waves emitting gadgets and reflexive surfaces. Additionally, it should not share a location with metal objects.
- Access the Linksys app and perform Linksys Velop firmware update. However, we advise you avoid interruption of the firmware update procedure. It can be harmful.
- Consider resetting your Linksys Velop extender and setting it up from scratch.
How to Set Up Linksys Velop Extender?
If you don’t know how to setup Linksys extender after resetting it, follow these steps:
- Connect your Velop extender to the router/modem.
- Launch the Linksys app.
- Put in the default Velop password to log in to the extender.
- Follow the on-screen prompts.
This was about how to install a Linksys Velop extender. We are hopeful that after resetting and reconfiguring the extender, your Velop will connect to the nearest node and you’ll be able to gain access to a super-fast WiFi connection.
