Is your Linksys Velop not finding the node? Is your internet connection sporadic and frustrating? Having your Linksys Velop node repeatedly deny the connection with the nearest node is disappointing. The scenario can be more painful when you are performing Linksys Velop setup. Thankfully, the problem you’re having may be solved by trying the hands on the tips jotted in this article. First, however, we need to investigate what’s causing the connectivity issue between the Linksys Velop and node.
Why is Your Linksys Velop Not Finding Node?
- Your Velop system and node are too far.
- Your Linksys Velop system’s WiFi signals are being disrupted.
- A newer version of the firmware is required for your Linksys Velop.
- Your Linksys Velop is becoming too hot to handle the workload.
- Incomplete Linksys Velop configuration.
Now that you know what may be causing the “Linksys Velop not finding node” problem, you can fix it by following these steps.
Resolved: Linksys Velop Not Finding Node
1. Reduce the Velop-Node Distance
Ascertain the reliability of the link between the Linksys Velop and the node. The issue might be coming into the picture due to the immense gap separating your Velop device and the node. Therefore, you are required to maintain a safe gap between your Velop and node.
2. Stay Away from WiFi Disruption
It is crucial that your Velop system not be in an area with WiFi interference before, during, or after setting up the Linksys Velop. Perhaps you were unaware of Linksys router login correctly. Likely, you have set up your Linksys Velop system in a space already overrun by other EM waves emanating gadgets.
To fix this, position your velop so that it is not in direct line of sight of any metal objects. It should not share a base with polished surfaces, geysers, Bluetooth speakers, microwave ovens, tracking devices, cellular phones, etc.
Also Check: TP Link Extender Setup – A Step-by-step Tutorial
3. Update the Linksys Firmware
Your Linksys Velop’s performance will suffer, and it may even stop working entirely if you use an outdated version of the firmware. As a result, upgrading the Linksys Velop firmware is yet another viable option for solving the problem you’re experiencing.
The Linksys app allows you to upgrade the firmware on your Velop system. To access the Network Administration section of your Linksys Velop, just log in and choose the Menu icon. Thereafter, press the Update Now option. The firmware of your Linksys Velop will be upgraded.
4. Prevent Overheating of Linksys Velop
If you put your Linksys Velop system in a room packed with a lot of things (and without ventilation), it might overheat. If you don’t want your Velop to overheat, keep it out from inside of a closet or from under a table. Instead, put it in an air-conditioned room.
Make sure to score out your WiFi system often. That way, dust won’t have a chance to collect on your Linksys Velop system, preventing it from heating up and rendering it unusable.
5. Reset the Velop
If none of the above workarounds fix the problem, the incomplete configuration of your Linksys Velop may be causing it to fail. Thus, you must configure the correctly. However, before you do that, you need to reset it to its original settings.
You must have a stable power source for your Velop system to do a Linksys Velop. When you’re ready, find and press the Reset button. There will be a reset of your Linksys Velop system to its original, default state. Launch the Linksys app and start configuring it from scratch. This is to inform you that whether you want to do Linksys Velop AC2200 setup or looking to install Linksys Velop AC4200 mesh system, the Linksys app will help you.
In Conclusion
This is how you fix the problem when your Linksys Velop is not finding the nearest node. We intend that this post will serve as a starting point for you to fix the problem and get your digital life back on track.
