Worrying about why the Netgear Orbi signals are giving you trouble? If you are connecting to Orbi and get signal signal-dropping issue every now and then, it can be bothersome. Many users report that after they set up their Orbi via the app or web interface using orbilogin.net, everything works fine. But after some time, the signal quality degrades. There are several causes why this happens.
This guide will help you learn about these causes along with the remedies. Trust us, once you have tried these tips, you will no longer face poor internet issues from your Orbi system.
Why Orbi Gives Poor WiFi Signals?
When you try to connect to your Orbi WiFi, if the signals keep dropping or you keep getting disconnected from WiFi then it could be due to any of the following reasons:
The Software is Not Updated
Every networking device has software embedded in it. This software helps the device to function. Just like our phones, computers, laptops etc. need updates, this software, known as firmware also needs to be updated on a regular basis. Firmware updates help the device give out optimum performance.
If you have not updated the firmware on your Orbi, this is the reason why you are getting poor WiFi signals or why you keep getting disconnected from it.
Orbi Router and Modem Connection is Not Secure
The second possible cause is a poor connection between the devices. The Orbi gets its input signals from the main gateway which can be a modem or direct DSL. If the connection between the router and modem is not made correctly, then you can face disconnection issues.
FYI, these two devices can be connected either by using a wireless connection or by using a LAN cable.
The Power Supply to Orbi is Not Adequate
Now, imagine if the power socket into which the Orbi router is plugged is broken or the power cable is damaged. What would happen? Orbi won’t turn on properly. Right? If the Orbi gets a fluctuating power supply, then it will get stuck in the reboot loop and hence the resultant signals from it will be very bad.
The Signals are Getting Interrupted
You could have placed the Orbi device in a place where there are many blockages or obstructions on its path. This interrupts its signals. Apart from this, other networking devices, and electrical appliances, like Bluetooth speakers, microwave ovens, cordless phones, etc. can also be the reason why the signal gets disturbed. Besides if you have kept your Orbi in a congested place like a corner, attic or basement, then also you won’t get good signals from it.
How to Boost Netgear Orbi WiFi Signals?
The previous section talked about various reasons that result in poor WiFi signals from Orbi devices. This section will shed light on what you can do to boost its WiFi.
Get the Firmware Updated
Get the firmware on your Netgear Orbi updated with the most recent version now. If you have no idea how to get your Orbi firmware updated then you can always refer to the user guide that you have received with it in the package. You can also find the user guide online. Get the instructions from there and upgrade the Orbi and boost its signals.
Connect the Devices Wisely
You should examine the connection between the Orbi router and the modem. Orbi purple light is an indication that there is an issue with the internet. Make the required changes.
The cable that is used to make the connection between the two devices should neither be damaged nor loosely inserted. Plus the ports that you have used should be the right ones. Replace the cable with a new one if it seems damaged. Try making the connection once again. Before you make the connection, clean the ports with a soft brush.
If the devices are connected wirelessly then bring them a little closer to each other. Observe the lights.
Ensure Adequate Power Supply
Be certain that the Netgear Orbi router and the satellites receive optimum power supply. Inspecting the power sockets as well as the power cables will be helpful in knowing if there is an issue with the electricity supply to any of the devices. Fix any damaged socket or use an alternative one. Or you can use a UPS if there is a power outage.
Ditch Interference
Relocate the Orbi devices away from any other interference-causing factors right away. Choose higher, clean, and open areas from where the signals can be radiated easily.
Verdict
The aforementioned tips and tricks will definitely prove to be useful to you in getting better signals from your Netgear Orbi WiFi system. Consider bookmarking the post for you may need to refer to it in the future.
